LoRaWAN APC340 backpack for watermeter

Parameters:

Functions:

1. Data reporting There are two ways to report data:

Magnetic suction reporting data: The module must be magnetically adsorbed for more than 5 seconds, otherwise the trigger is invalid.

Timing active reporting data: The timing reporting cycle and timing reporting time can be set. The timing reporting cycle has a value range of 600~86400S, and the timing reporting time has a value range of 0~23H. After setting, the reporting time is calculated based on the device’s DeviceEui, timing reporting cycle, and timing reporting time. The default value of the timing reporting cycle is 28800S, and the default value of the timing reporting time is 6H.

2. Measurement Supports Hall, reed tube, non-magnetic and other measurement methods.
   
3. Power-off storage Supports power-off storage without the need to re-initialize parameters.
   
4. Anti-disassembly alarm The anti-disassembly alarm function is turned on immediately after power-on. When the device is disassembled, the disassembly flag and the historical disassembly flag are displayed at the same time as faults. After installing the device for 1 minute, the disassembly fault flag is cleared.
   
5. Frozen data storage After the device is calibrated, it supports storing frozen data for nearly 40 days and 10 years of annual frozen data. The stored frozen data can be queried through the cloud platform.
   
6. Parameter setting Supports wireless near-end parameter setting, which is realized through production setting tools. There are two communication methods for near-end parameter setting: wireless communication method and NFC communication method.
   
7. Program upgrade Supports serial port upgrade of module program